Show the menu Goldring website
Close
Cartridges
Turntables
Record Care
Cartridge repair
Where to buy
About Goldring


Myryad Smart My-Link® Communications Bus


All Myryad separates, both MX and Z Series are fitted with My-Link input/outputs using standard RCA phono connectors. In a system, each product is My-Linked to the next – in daisy-chain fashion – using low cost interconnects. The Integrated Amplifier or Preamplifier (see list below) is always the “controller” in a My-Linked system, which can also include a CD Player, Tuner and other compatible Myryad products. My-Link has three functions:


1. It routes IR remote commands between units so that one can still respond even its own IR receiver is obscured.


2. When the controller is switched out of standby (from the front panel or remote control) all other MyLinked units will also switch out of standby. In the same way, switching the controller into standby will return the whole linked system to standby.


3. Myryad Smart My-Link® adds a range of system integration functions to make using a Myryad system easier and more intuitive:

3.1 The system will power on and select CD input from a single key press, such as CD drawer open or CD play – after which the CD player will carry out the specified function.

3.2 When the remote control Mute key is pressed to Mute the amplifier, the CD player will automatically be paused.When Mute is pressed again the CD will be switched to play so the music will resume without missing anything.

3.3 When a connected Tuner or CD player is switched out of standby, the controller will switch out of standby (if in standby) and select the relevant input – Tuner or CD.

3.4 When a source select key is pressed on the remote control (CD or Tuner), the controller will switch out of standby and go to the selected input. At the same time the relevant unit will also be switched out of standby.

3.5 Power Saving Mode: After listening to a CD (say) and switching to a different input on the controller, the CD player will be switched into standby after a 10 minute delay. A My-Linked Tuner will operate in a similar way.


My-Link controllers in current range:

MXP2000

MXI2080

MXI2150

Z240



Below you will find an example of what this means in real life - comparing

how a Smart My-Linked Myryad system operates versus a regular system of

Hi-Fi separates.


Operation

Other Hi-Fi

Myryad Smart My-Link System

Want to play your new CD?
Amplifier:
Press STANDBY – ON
Press CD input select
CD player:
Press STANDBY – ON
Press OPEN/CLOSE
4 button presses
CD player:
Press OPEN/CLOSE
1 button press
Want to play a CD that’s already in the player?
Amplifier
Press STANDBY – ON
Press CD input select
CD player:
Press STANDBY – ON
Press PLAY
4 button presses
CD player:
Press PLAY
1 button press
Want to listen to your Tuner?
Amplifier:Press STANDBY – ON
Press TUNER input select
Tuner: Press STANDBY – ON
3 button presses
Tuner: Press STANDBY – ON
1 button press
You want to switch the whole system into standby?
Press the standby button on each unit.
2/3/4/5 button presses
Press the standby button on the amplifier.
1 button press
The phone rings while you’re listening to a CD? Press Mute. When the call finishes and you de-mute you’ve missed 2 or 3 tracks. Press Mute. When the call finishes you de-mute and the CD automatically starts playing again from where you left it.
After you’ve been listening for a while you switch to the phono input to listen to some vinyl? The CD player and Tuner remain on consuming power. The CD player and Tuner automatically switch to standby within 10 minutes.
Want to control your system from a multi-room controller? Connect up an IR repeater system and stick an IR “blinker” on the front of each unit. Interface the multi-room controller’s IR link direct to the My-Link input on your Myryad amplifier.
For further details contact info@armourhome.co.uk.